Page top

Industrial Automation

Taiwan

會員中心歡迎 登入 / 加入會員

Global Navigation

H5CC

Digital Timer

H5CC

New and improved design for easier use, programming, maintenance and user feedback. The improved user interface is intuitive and offers better overall visibility. Replacement time notification function notifies the user of potential preventive maintenance.

相關資訊

更新日期 2024年11月5日

Ratings

Item Models H5CC-A[] H5CC-A11[] H5CC-L8[]
Classification Standard Type Economy Type
Ratings Power supply
voltage *1		 • 100 to 240 VAC 50/60 Hz
• 12 to 48 VDC/24 VAC 50/60 Hz
• 24 to 240 VDC/24 to 240 VAC 50/60 Hz (only for the H5CC-[]F)
Allowable voltage fluctuation range 85% to 110% of rated supply voltage (90% to 110% at 12 to 48 VDC)
Power consumption Approx.6.5 VA at 100 to 240 VAC
Approx.5.4 VA/3.2 W at 24 VAC/12 to 48 VDC
Approx. 5.6 VA/2.7 W at 24 to 240 VAC/24 to 240 VDC *2
Mounting method Flush mounting Flush mounting, surface mounting, DIN track mounting
External connections Screw terminals 11-pin socket 8-pin socket
Degree of protection Compliant with IEC IP66 for panel surface only and when Y92S-P6 Waterproof Packing is used Certified for UL Type 1
Digits 6 digits
Time ranges 0.001 s to 999.999 s, 0.01 s to 9999.99 s, 0.1 s to 99999.9 s, 1 s to 999999 s, 1 s to 99 h 59 min 59 s, 0.1 m to 99999.9 min, 1 min to 999999 min, 1 min to 9999 h 59 min, 0.1 h to 99999.9 h, 1 h to 999999 h
Timer mode Elapsed time (Up), remaining time (Down) (selectable)
Inputs Input signals Signal, Reset, Gate Signal, Reset
(no inputs on the H5CC-L8E[])
Input method No-voltage (NPN) input/voltage (PNP) input (switchable)
(only no-voltage input is
available for the H5CC-A11F)
No-voltage input
ON impedance:
1 kΩ max. (Leakage current: approx. 12 mA when 0 Ω)
(Approx. 1 mA for the H5CC-A11F)
ON residual voltage: 3 V max.
(1 V max. for the H5CC-A11F)
OFF impedance: 100 kΩ min.
Voltage input
High (logic) level: 4.5 to 30 VDC
Low (logic) level: 0 to 2 VDC
(Input resistance: approx. 4.7 kΩ)		 No-voltage input
On-impedance: 1 kΩ max.
(Leakage current: 12 mA when 0 Ω)
ON residual voltage: 3 V max.
OFF impedance: 100 kΩ min.
Signal, reset, gate Minimum input signal width: 1 or 20 ms (selectable, 50 ms for the H5CC-A11F)
Reset system Power reset (depending on output mode),
external reset, manual reset, automatic reset (depending on output mode)
Power reset Minimum power-opening time: 0.5 s (except for A-3, b-1, F, ton-1, and toff-1 mode)
(1 s for the H5CC-AU[] and 0.1 s for the H5CC-[]F)
Reset voltage 10% max. of power supply voltage
Sensor waiting time 250 ms max.
(Control output is turned OFF and no input is accepted during sensor waiting time.)
Output Output modes A: Signal ON delay I, A-1: Signal ON delay II, A2: Power ON delay I, A3: Power ON delay II, b: Flicker I, b-1: Flicker II, b-5: One-shot flicker, C: Signal ON/OFF delay I, d: Signal OFF delay I, E: Interval, F: Cumulative, G: Signal ON/OFF delay II, H: Signal OFF delay II, Z: ON/OFF-duty-adjustable flicker, S: Stopwatch, toff: Flicker
OFF start I, ton: Flicker ON start I, toff-1: Flicker OFF start II, ton-1: Flicker ON start II
H5CC-L8E[]
A2: Power ON delay I, b: Flicker I, E: Interval,
Z: ON/OFF-duty-adjustable flicker, toff:
Flicker OFF start I, ton: Flicker ON start I
One-shot time 0.01 to 99.99 s
Control output • Models with Contact Outputs
5 A at 250 VAC/30 VDC, resistive load (cos =1)
Minimum applicable load: 10 mA at 5 VDC (failure level: P, reference value)
Contact materials: AgSnIn
• Transistor output: NPN open collector,
100 mA at 30 VDC max., residual voltage: 1.5 VDC max. (Approx. 1 V),
Leakage current: 0.1 mA max.
External power supply 12 VDC (±10%), 100 mA (only for the H5CC-AU[])
Note. Refer to Precautions for Correct Use on Data Sheet for details.
Display method *3 7-segment, negative transmissive LCD;
Present value: 10-mm-high characters, white
Set value: 6-mm-high characters, green		 7-segment, negative transmissive LCD;
Present value: 10-mm-high characters, white
Set value: 6-mm-high characters, green
Memory backup No-volatile memory (overwrites: 100,000 times min.) that can store data for 10 years min.
Operating temperature range -10 to 55°C
(-10 to 50°C if timers are mounted side by side) (with no icing or condensation)
Storage temperature range -25 to 70°C (with no icing or condensation)
Operating humidity range 25% to 85%
Case color Black (N1.5)
Attachments Flush mounting adapter,
waterproof packing,
terminal cover		 ――

*1. Do not use the output from an inverter as the power supply. The ripple must be 20% maximum for DC power.
*2. Inrush current will flow for a short time when the power supply is turned ON.

Inrush Current (Reference Values)

Voltage Applied voltage Inrush current (peak value) Time
100 to 240 VAC 264 VAC 6.5 A 0.74 ms
12 to 48 VDC/24 VAC 26.4 VAC 13.6 A 0.88 ms
52.8 VDC 12.9 A 0.80 ms
24 to 240 VDC/24 to 240 VAC 264 VAC 5.5 A 0.26 ms
264 VDC 3.9 A 0.26 ms

*3. The display is lit only when the power is ON. Nothing is displayed when power is OFF.

Item Models H5CC-AWSD
Classification Digital Timer with two-stage setting, and forecast output
Ratings Power supply voltage 12 to 48 VDC/24 VAC 50/60 Hz
Allowable voltage fluctuation range 85% to 110% of rated supply voltage (90% to 110% at 12 to 48 VDC)
Power consumption Approx. 5.32 VA/3.17 W at 24 VAC/12 to 48 VDC *1
Mounting method Flush mounting
External connections Screw terminals
Degree of protection Compliant with IEC IP66 for panel surface only and when Y92S-P6 Waterproof Packing is used Certified for UL Type 1
Time range 0.001 s to 999.999 s, 0.01 s to 9999.99 s, 0.1 s to 99999.9 s, 1 s to 999999 s, 1 s to 99 h 59 min 59 s, 0.1 min to 99999.9 min, 1 min to 999999 min, 1 min to 9999 h 59 min, 0.1 h to 99999.9h, 1 h to 999999 h
Timer mode Elapsed time (Up)
Inputs Input signals Signal, reset, gate
Input method No-voltage (NPN) input/voltage (PNP) input (switchable)
No-voltage input
ON impedance: 1 kΩ max. (Leakage current: 12 mA when 0 Ω)
ON residual voltage: 3 V max.
OFF impedance: 100 kΩ min.
Voltage input
High (logic) level: 4.5 to 30 VDC
Low (logic) level: 0 to 2 VDC (Input resistance: approx. 4.7 kΩ)
Signal, reset, gate Minimum input signal width: 1 or 20 ms (selectable, same for all input)
Reset system Power resets (only for A mode), external and manual reset
Power reset Minimum power-opening time: 0.5 s (except for F-1 mode)
Reset voltage 10% max. of power supply voltage
Sensor waiting time 250 ms max.
(Control output is turned OFF and no input is accepted during sensor waiting time.)
Outputs Output modes A, F-1
Output type Transistor output: NPN open collector,
100 mA at 30 VDC max.
residual voltage: 1.5 VDC max. (Approx. 1 V)
Leakage current: 0.1 mA max.
Display 7-segment, negative transmissive LCD;
Present value: 10-mm-high characters, white Set value: 6-mm-high characters, green *2
Memory backup No-volatile memory (overwrites: 100,000 times min.)
that can store data for 10 years min.
Operating temperature range -10 to 55°C (-10 to 50°C if timers are mounted side by side)
(with no icing or condensation)
Storage temperature range -25 to 70°C (with no icing or condensation)
Operating humidity range 25% to 85%
Case color Black (N1.5)
Attachments Waterproof packing, flush mounting adapter, terminal cover

*1.Inrush current will flow for a short time when the power supply is turned ON.

Inrush Current (Reference Values)

Voltage Applied voltage Inrush current (peak value) Time
12 to 48 VDC/24 VAC 52.8 VAC 13.6 A 0.88 ms
42.8 VDC 12.9 A 0.80 ms

*2.The display is lit only when the power is ON. Nothing is displayed when power is OFF.

Characteristics

Accuracy of operating time and setting error
(including temperature and voltage influences)		 Power-ON start: ±0.01%±0.05 s max. *1
Signal start: ±0.005%±0.03 s max. *1
Signal start for transistor output model: ±0.005%±3 ms max. *1 *2
If the set value is within the sensor waiting time at startup the control output of the H5CC will not turn ON until the sensor waiting time passes.
*1.The values are based on the set value.
*2.The value is applied for a minimum input signal width of 1 ms.
Insulation resistance 100 MΩ min. (at 500 VDC)
between current-carrying terminal and exposed non-current-carrying metal parts, between non-continuous contacts
Dielectric strength 2,900 VAC, 50/60 Hz for 1 min between current-carrying terminal and operating section
2,000 VAC, 50/60 Hz for 1 min between power supply and input circuits
for models other than the H5CC-A11F and H5CC-L8E[]
(1,500 VAC for 12 to 48 VDC/24 VAC)
1,500 VAC, 50/60 Hz for 1 min between control output, power supply,
and input circuits (for models other than the H5CC-L8E[]) for H5CC-[]SD
2,000 VAC, 50/60 Hz for 1 min between control output, power supply,
and input circuits (for models other than the H5CC-L8E[]) for other models
1,000 VAC, 50/60 Hz for 1 min between non-continuous contacts
Impulse withstand voltage 5 kV (between power terminals) for 100 to 240 VAC, 1.0 kV for 24 VAC/12 to 48 VDC
7.4 kV (between current-carrying terminal and operating section)
Static immunity Malfunction: 8 kV
Destruction: 15 kV
Vibration resistance Destruction 10 to 55 Hz with 0.75-mm single amplitude each in three directions for 2 h each
Malfunction 10 to 55 Hz with 0.35-mm single amplitude each in three directions for 10 min each
Shock resistance Destruction 300 m/s2 in three directions, three cycles
Malfunction 100 m/s2 in three directions, three cycles
Life expectancy Mechanical 10,000,000 operations min.
(under no load at switching frequency of 1,800 operations/h and ambient temperature of 23°C)
Electrical 100,000 operations min.
(5 A at 250 VAC, resistive load at 1,800 operations/h and ambient temperature of 23°C) *
Weight Approx. 115 g (Timer only)

*Refer to Electrical Life Test Curve.

Electrical Life Test Curve (Reference Values)

H5CC 額定/性能 11
H5CC 額定/性能 12

Applicable Standards

Approved safety standards cULus (or cURus): UL508/CSA C22.2 No. 14 *1
Conforms to EN61812-1: Pollution degree 2/overvoltage category III
B300 PILOT DUTY, 1/4 HP 120 VAC, 1/3 HP, 240 VAC, 5 A, 250 VAC/30 VDC resistive load
VDE0106/P100
CCC: GB/T 14048.5 Pollution degree 2/overvoltage category III *2
RCM
UKCA
EMC (EMI) EN61812-1
Emission Enclosure: EN55011 Group 1 class A
Emission AC mains: EN55011 Group 1 class A
(EMS) EN61812-1
Immunity ESD: EN61000-4-2:
4 kV contact discharge
8 kV air discharge
Immunity RF-interference: EN61000-4-3:
10 V/m (Amplitude modulated, 80 MHz to 1 GHz);
3 V/m (Amplitude modulated, 1.4 G to 2 GHz);
1 V/m (Amplitude modulated, 2 G to 2.7 GHz);
10 V/m (Pulse-modulated, 900 MHz±5 MHz)
Immunity Conducted Disturbance: EN61000-4-6: 10 V (0.15 to 80 MHz)
Immunity Burst: EN61000-4-4:
2 kV power-line;
1 kV I/O signal-line
Immunity Surge: EN61000-4-5:
1 kV line to lines (power and output lines (relay outputs));
2 kV line to ground (power and output lines (relay outputs))
Immunity Voltage Dip/Interruption: EN61000-4-11:
Voltage Dip
1 cycle, 100% (rated voltage)
10/12 cycle, 60% (rated voltage)
25/30 cycle, 30% (rated voltage)
Interruption
250/300 cycle, 100% (rated voltage)

*1.The following safety standards apply to models with sockets (H5CC-L8[]/-A11[]).
　　cUL (Listing): Applicable when an OMRON P2CF(-E) Socket is used.
　　cUR (Recognition): Applicable when any other socket is used.
*2.CCC certification requirements

Rated operating voltage Ue
Rated operating current Ie		 Contact output:
AC-15: Ue: 250 VAC, Ie: 3 A
AC-13: Ue: 250 VAC, Ie: 5 A
DC-13: Ue: 30 VDC, Ie: 0.5 A
Transistor output:
DC-13: Ue: 30 VDC, Ie: 0.1 A
Rated insulation voltage 250 V
Rated impulse withstand voltage
(altitude: 2,000 m max.)		 4 kV (at 240 VAC)
Conditional short-circuit current 1000 A

I/O Functions

For details, refer to the timing charts on Data Sheet.

Inputs *1 Start signal Normally functions to start timing.
In modes A-2 and A-3, disable timing. In mode S, starts and stops timing.
Reset •Resets present value. (In elapsed time mode, the present value returns to 0; in remaining time mode, the present value returns to the set value.)
•Count inputs are not accepted and control output turns OFF while reset input is ON.
•Reset indicator is lit while reset input is ON.
Gate *2 Disables timing. (If a reset occurs while the gate input is ON, a reset will be performed.)
Outputs Control output (OUT) Outputs take place according to designated operating mode when timer reaches corresponding set value.
Forecast value setting *3 Control output (OUT2) Turns ON when the present value reaches the set value.
Forecast output (OUT1) Turns ON when the present value reaches the forecast value.
Absolute value setting *3 Control output 2 (OUT2) Turns ON when the present value reaches the set value 2.
Control output 1 (OUT1) Turns ON when the present value reaches the set value 1.

*1.The H5CC-L8E[] does not have an input.
*2.The H5CC-L[] does not have a gate input.
*3.For the H5CC-AWSD.

Response Delay Time When Resetting (Transistor Output)

The following table shows the output delay time from when the reset signal is input until the output is turned OFF.

(Reference value)

Minimum reset signal width Output delay time
1 ms 0.58 to 0.78 ms
20 ms 13.7 to 17.2 ms

更新日期 2024年11月5日

產品類別

產品資訊

解決方案

支援服務

關於我們

聯絡我們

網路商店

線上客服

産品技術客服中心
008-0186-3102

Site Information

© Copyright OMRON Corporation 1996 - 2023. All Rights Reserved.