Taiwan
產品資訊TOP
規格選型
| Appearance | Applicable Medium | Control output | Communication
method |
IO-Link baud rate | Model |
|---|---|---|---|---|---|
 |
Liquid | PNP/NPN
selectable |
IO-Link Analog | COM2 | E8FC-25SD |
| COM3 | E8FC-25ST |
E8FC
IoT Flow Sensors
Detect signs of abnormalities in cooling water, water-soluble coolant, and water-insoluble oil by simultaneous measurement of “flow rate + temperature”
更新日期 2022年8月1日
Sensors
Note: Please contact your OMRON sales representative regarding the IO-Link setup file (IODD file).
Adapters
It must be selected from the adapters below.
| Appearance | Applicable diameter * | Thread type | Materials | Model | |
|---|---|---|---|---|---|
| Nominal
diameter A |
Nominal
diameter B |
||||
 |
10 A | 3/8” | R (taper thread) | SUS304 | E8FC-YA-R10A |
| NPT (taper thread) | E8FC-YA-N10A | ||||
 |
15 A | 1/2” | R (taper thread) | E8FC-YA-R15A | |
| NPT (taper thread) | E8FC-YA-N15A | ||||
 |
20 A | 3/4” | R (taper thread) | E8FC-YA-R20A | |
| NPT (taper thread) | E8FC-YA-N20A | ||||
 |
25 A | 1” | R (taper thread) | E8FC-YA-R25A | |
| NPT (taper thread) | E8FC-YA-N25A | ||||
* It is recommended that the piping fitting diameters be theme on both the piping side and the sensor mounting side.
Because the sensor is designed so that the measurement area is in the center of the piping, correct measurement
may not be possible with different diameter fittings.
Refer to Piping Method on Catalog for the recommended pipe joint.
Because the sensor is designed so that the measurement area is in the center of the piping, correct measurement
may not be possible with different diameter fittings.
Refer to Piping Method on Catalog for the recommended pipe joint.
Cables (Sensor I/O Connectors)
A Cable is not provided with the Sensor. It must be ordered separately.
| Type | Appearance | Cable | Model |
|---|---|---|---|
| Socket on one
cable end |
Straight
 |
2 m | XS5F-D421-D80-F |
| 5 m | XS5F-D421-G80-F | ||
L-shaped
 |
2 m | XS5F-D422-D80-F | |
| 5 m | XS5F-D422-G80-F | ||
| Socket and plug on
cable ends * |
Straight/straight
 |
2 m | XS5W-D421-D81-F |
| 5 m | XS5W-D421-G81-F | ||
L-shaped/L-shaped
 |
2 m | XS5W-D422-D81-F | |
| 5 m | XS5W-D422-G81-F |
Note: Refer to Sensor I/O Connectors/Sensor Controllers on OMRON website for details.
* Straight type/L-shape type combinations are also available.
O-ring (for replacement)
| Appearance | Type | Model |
|---|---|---|
 |
For E8FC-25[][] | E8FC-YL-1 |
更新日期 2022年8月1日
Top of page
© Copyright OMRON Corporation 1996 - 2023. All Rights Reserved.