Page top

Industrial Automation

Taiwan

會員中心歡迎 登入 / 加入會員

Global Navigation

2015/03 停產商品

E5GN

Basic-type Digital Temperature Controller (48 x 24 mm)

E5GN

New 48 x 24-mm Basic Temperature Controller with Enhanced Functions and Performance. Improved Indication Accuracy and Preventive Maintenance Function.

此頁記載內容是在依據停產前商品型錄內刊載的資訊，包括商品的特點 /價格 /對應規格 /選購品等，可能會和現狀有所出入。請在選購前再次確認系統的適用性及安全性。

相關資訊

更新日期 2012年10月17日

Controllers with Screw Terminal Blocks

Models with Temperature Inputs

Models with One Control Output and a 100 to 240-VAC Power Supply

Case
color		 Control
output		 Control
mode
*1		 No. of
auxiliary
outputs		 Detection
of heater
burnout,
SSR failure,
and heater
overcurrent		 No. of
event
inputs		 Transfer
output
*2		 Communi-
cations		 Previous model New model
Thermocou-
ple input		 Resistance
thermome-
ter input
Black Relay
output		 Standard --- --- --- --- --- E5GN-RTC E5GN-RP E5GN-RT
Standard
or
heating/
cooling		 1 E5GN-R1TC E5GN-R1P E5GN-R1T
2 --- --- E5GN-R1BT
--- RS-232C --- --- E5GN-R101T-FLK
RS-485 E5GN-
R03TC-FLK		 E5GN-
R03P-FLK		 E5GN-R103T-FLK
2 --- --- --- E5GN-R2T
Detection for
single-phase
heaters		 --- --- E5GN-R2HT
--- 2 --- --- E5GN-R2BT
--- RS-485 --- --- E5GN-R203T-FLK
Voltage
output
(for
driving
SSR)		 Standard --- --- --- --- --- E5GN-QTC E5GN-QP E5GN-QT
Standard
or
heating/
cooling		 1 E5GN-Q1TC E5GN-Q1P E5GN-Q1T
2 --- --- E5GN-Q1BT
--- RS-232C --- --- E5GN-Q101T-FLK
RS-485 E5GN-
Q03TC-FLK		 E5GN-
Q03P-FLK		 E5GN-Q103T-FLK
2 --- --- --- E5GN-Q2T
Detection for
single-phase
heaters		 --- --- E5GN-Q2HT
--- 2 --- --- E5GN-Q2BT
--- RS-485 --- --- E5GN-Q203T-FLK
Current
output		 Standard
or
heating/
cooling		 1 --- --- Transfer
output
using
control
output		 --- --- --- E5GN-C1T
2 --- --- E5GN-C1BT
--- RS-232C --- --- E5GN-C101T-FLK
RS-485 --- --- E5GN-C103T-FLK

*1. If heating/cooling control mode is used, an auxiliary output is used as a control output for the cooling side. The
       number of auxiliary outputs that can be used will decrease by one. Also, the signal for the control output for the
       cooling side will be a relay output.
*2. A current control output can be used as the transfer output. In that case, an auxiliary output is used as the control
       output. (This is not possible for models without an auxiliary output.) The control output will be a relay output. The
       number of auxiliary outputs that can be used will decrease by one.

Models with One Control Output and a 24-VAC/VDC Power Supply

Case
color		 Control
output		 Control
mode
*1		 No. of
auxiliary
outputs		 Detection
of heater
burnout,
SSR failure,
and heater
overcurrent		 No. of
event
inputs		 Transfer
output
*2		 Communi-
cations		 Previous model New model
Thermocou-
ple input		 Resistance
thermome-
ter input
Black Relay
output		 Standard --- --- --- --- --- E5GN-RTC E5GN-RP E5GN-RTD
Standard
or
heating/
cooling		 1 E5GN-R1TC E5GN-R1P E5GN-R1TD
2 --- --- E5GN-R1BTD
--- RS-232C --- --- E5GN-R101TD-FLK
RS-485 E5GN-
R03TC-FLK		 E5GN-
R03P-FLK		 E5GN-R103TD-FLK
2 --- --- --- E5GN-R2TD
Detection for
single-phase
heaters		 --- --- E5GN-R2HTD
--- 2 --- --- E5GN-R2BTD
--- RS-485 --- --- E5GN-R203TD-FLK
Voltage
output
(for
driving
SSR)		 Standard --- --- --- --- --- E5GN-QTC E5GN-QP E5GN-QTD
Standard
or
heating/
cooling		 1 E5GN-Q1TC E5GN-Q1P E5GN-Q1TD
2 --- --- E5GN-Q1BTD
--- RS-232C --- --- E5GN-Q101TD-FLK
RS-485 E5GN-
Q03TC-FLK		 E5GN-
Q03P-FLK		 E5GN-Q103TD-FLK
2 --- --- --- E5GN-Q2TD
Detection for
single-phase
heaters		 --- --- E5GN-Q2HTD
--- 2 --- --- E5GN-Q2BTD
--- RS-485 --- --- E5GN-Q203TD-FLK
Current
output		 Standard
or
heating/
cooling		 1 --- --- Transfer
output
using
control
output		 --- --- --- E5GN-C1TD
2 --- --- E5GN-C1BTD
--- RS-232C --- --- E5GN-C101TD-FLK
RS-485 --- --- E5GN-C103TD-FLK

*1. If heating/cooling control mode is used, an auxiliary output is used as a control output for the cooling side. The
       number of auxiliary outputs that can be used will decrease by one. Also, the signal for the control output for the
       cooling side will be a relay output.
*2. A current control output can be used as the transfer output. In that case, an auxiliary output is used as the control
       output. (This is not possible for models without an auxiliary output.) The control output will be a relay output. The
       number of auxiliary outputs that can be used will decrease by one.

Models with Analog Inputs

Models with One Control Output and a 100 to 240-VAC Power Supply

Case
color		 Control
output		 Control
mode
*1		 No. of
auxiliary
outputs		 Detection
of heater
burnout,
SSR failure,
and heater
overcurrent		 No. of
event
inputs		 Transfer
output
*2		 Communi-
cations		 Previous model New model
Thermocou-
ple input		 Resistance
thermome-
ter input
Black Relay
output		 Standard
or
heating/
cooling		 1 --- --- --- RS-485 --- --- E5GN-R103L-FLK
Voltage
output
(for
driving
SSR)		 --- --- E5GN-Q103L-FLK
Current
output		 Transfer
output
using
control
output		 --- --- --- E5GN-C1L

Note: Models with analog inputs do not display the temperature unit.
*1. If heating/cooling control mode is used, an auxiliary output is used as a control output for the cooling side. The
       number of auxiliary outputs that can be used will decrease by one. Also, the signal for the control output for the
       cooling side will be a relay output.
*2. A current control output can be used as the transfer output. In that case, an auxiliary output is used as the control
       output. (This is not possible for models without an auxiliary output.) The control output will be a relay output. The
       number of auxiliary outputs that can be used will decrease by one.

Models with One Control Output and a 24-VAC/VDC Power Supply

Case
color		 Control
output		 Control
mode
*1		 No. of
auxiliary
outputs		 Detection
of heater
burnout,
SSR failure,
and heater
overcurrent		 No. of
event
inputs		 Transfer
output
*2		 Communi-
cations		 Previous model New model
Thermocou-
ple input		 Resistance
thermome-
ter input
Black Relay
output		 Standard
or
heating/
cooling		 1 --- --- --- RS-485 --- --- E5GN-R103LD-FLK
Voltage
output
(for
driving
SSR)		 --- --- E5GN-Q103LD-FLK
Current
output		 Transfer
output
using
control
output		 --- --- --- E5GN-C1LD

Note: Models with analog inputs do not display the temperature unit.
*1. If heating/cooling control mode is used, an auxiliary output is used as a control output for the cooling side. The
       number of auxiliary outputs that can be used will decrease by one. Also, the signal for the control output for the
       cooling side will be a relay output.
*2. A current control output can be used as the transfer output. In that case, an auxiliary output is used as the control
       output. (This is not possible for models without an auxiliary output.) The control output will be a relay output. The
       number of auxiliary outputs that can be used will decrease by one.

Controllers with Screwless Clamp Terminal Blocks

Models with Temperature Inputs

Models with One Control Output and a 100 to 240-VAC Power Supply

Case
color		 Control
output		 Control
mode
*1		 No. of
auxiliary
outputs		 Detection
of heater
burnout,
SSR failure,
and heater
overcurrent		 No. of
event
inputs		 Transfer
output
*2		 Communi-
cations		 Previous model New model
Thermocou-
ple input		 Resistance
thermome-
ter input
Black Relay
output		 Standard --- --- --- --- --- E5GN-RTC E5GN-RP E5GN-RT-C
Standard
or
heating/
cooling		 1 E5GN-R1TC E5GN-R1P E5GN-R1T-C
2 --- --- E5GN-R1BT-C
--- RS-232C --- --- E5GN-R101T-C-FLK
RS-485 E5GN-
R03TC-FLK		 E5GN-
R03P-FLK		 E5GN-R103T-C-FLK
2 --- --- --- E5GN-R2T-C
Detection for
single-phase
heaters		 --- --- E5GN-R2HT-C
--- 2 --- --- E5GN-R2BT-C
--- RS-485 --- --- E5GN-R203T-C-FLK
Voltage
output
(for
driving
SSR)		 Standard --- --- --- --- --- E5GN-QTC E5GN-QP E5GN-QT-C
Standard
or
heating/
cooling		 1 E5GN-Q1TC E5GN-Q1P E5GN-Q1T-C
2 --- --- E5GN-Q1BT-C
--- RS-232C --- --- E5GN-Q101T-C-FLK
RS-485 E5GN-
Q03TC-FLK		 E5GN-
Q03P-FLK		 E5GN-Q103T-C-FLK
2 --- --- --- E5GN-Q2T-C
Detection for
single-phase
heaters		 --- --- E5GN-Q2HT-C
--- 2 --- --- E5GN-Q2BT-C
--- RS-485 --- --- E5GN-Q203T-C-FLK
Current
output		 Standard
or
heating/
cooling		 1 --- Transfer
output
using
control
output		 --- --- --- E5GN-C1T-C
2 --- --- E5GN-C1BT-C
--- RS-232C --- --- E5GN-C101T-C-FLK
RS-485 --- --- E5GN-C103T-C-FLK

*1. If heating/cooling control mode is used, an auxiliary output is used as a control output for the cooling side. The
       number of auxiliary outputs that can be used will decrease by one. Also, the signal for the control output for the
       cooling side will be a relay output.
*2. A current control output can be used as the transfer output. In that case, an auxiliary output is used as the control
       output. (This is not possible for models without an auxiliary output.) The control output will be a relay output. The
       number of auxiliary outputs that can be used will decrease by one.

Models with One Control Output and a 24-VAC/VDC Power Supply

Case
color		 Control
output		 Control
mode
*1		 No. of
auxiliary
outputs		 Detection
of heater
burnout,
SSR failure,
and heater
overcurrent		 No. of
event
inputs		 Transfer
output
*2		 Communi-
cations		 Previous model New model
Thermocou-
ple input		 Resistance
thermome-
ter input
Black Relay
output		 Standard --- --- --- --- --- E5GN-RTC E5GN-RP E5GN-RTD-C
Standard
or
heating/
cooling		 1 E5GN-R1TC E5GN-R1P E5GN-R1TD-C
2 --- --- E5GN-R1BTD-C
--- RS-232C --- --- E5GN-R101TD-C-FLK
RS-485 E5GN-
R03TC-FLK		 E5GN-
R03P-FLK		 E5GN-R103TD-C-FLK
2 --- --- --- E5GN-R2TD-C
Detection for
single-phase
heaters		 --- --- E5GN-R2HTD-C
--- 2 --- --- E5GN-R2BTD-C
--- RS-485 --- --- E5GN-R203TD-C-FLK
Voltage
output
(for
driving
SSR)		 Standard --- --- --- --- --- E5GN-QTC E5GN-QP E5GN-QTD-C
Standard
or
heating/
cooling		 1 E5GN-Q1TC E5GN-Q1P E5GN-Q1TD-C
2 --- --- E5GN-Q1BTD-C
--- RS-232C --- --- E5GN-Q101TD-C-FLK
RS-485 E5GN-
Q03TC-FLK		 E5GN-
Q03P-FLK		 E5GN-Q103TD-C-FLK
2 --- --- --- E5GN-Q2TD-C
Detection for
single-phase
heaters		 --- --- E5GN-Q2HTD-C
--- 2 --- --- E5GN-Q2BTD-C
--- RS-485 --- --- E5GN-Q203TD-C-FLK
Current
output		 Standard
or
heating/
cooling		 1 --- --- Transfer
output
using
control
output		 --- --- --- E5GN-C1TD-C
2 --- --- E5GN-C1BTD-C
--- RS-232C --- --- E5GN-C101TD-C-FLK
RS-485 --- --- E5GN-C103TD-C-FLK

*1. If heating/cooling control mode is used, an auxiliary output is used as a control output for the cooling side. The
       number of auxiliary outputs that can be used will decrease by one. Also, the signal for the control output for the
       cooling side will be a relay output.
*2. A current control output can be used as the transfer output. In that case, an auxiliary output is used as the control
       output. (This is not possible for models without an auxiliary output.) The control output will be a relay output. The
       number of auxiliary outputs that can be used will decrease by one.

Models with Analog Inputs

Models with One Control Output and a 100 to 240-VAC Power Supply

Case
color		 Control
output		 Control
mode
*1		 No. of
auxiliary
outputs		 Detection
of heater
burnout,
SSR failure,
and heater
overcurrent		 No. of
event
inputs		 Transfer
output
*2		 Communi-
cations		 Previous model New model
Thermocou-
ple input		 Resistance
thermome-
ter input
Black Current
output		 Standard
or
heating/
cooling		 1 --- --- Transfer
output
using
control
output		 --- --- --- E5GN-C1L-C

Note: Models with analog inputs do not display the temperature unit.
*1. If heating/cooling control mode is used, an auxiliary output is used as a control output for the cooling side. The
       number of auxiliary outputs that can be used will decrease by one. Also, the signal for the control output for the
       cooling side will be a relay output.
*2. A current control output can be used as the transfer output. In that case, an auxiliary output is used as the control
       output. (This is not possible for models without an auxiliary output.) The control output will be a relay output. The
       number of auxiliary outputs that can be used will decrease by one.

Models with One Control Output and a 24-VAC/VDC Power Supply

Case
color		 Control
output		 Control
mode
*1		 No. of
auxiliary
outputs		 Detection
of heater
burnout,
SSR failure,
and heater
overcurrent		 No. of
event
inputs		 Transfer
output
*2		 Communi-
cations		 Previous model New model
Thermocou-
ple input		 Resistance
thermome-
ter input
Black Current
output		 Standard
or
heating/
cooling		 1 --- --- Transfer
output
using
control
output		 --- --- --- E5GN-C1LD-C

*1. If heating/cooling control mode is used, an auxiliary output is used as a control output for the cooling side. The
       number of auxiliary outputs that can be used will decrease by one. Also, the signal for the control output for the
       cooling side will be a relay output.
*2. A current control output can be used as the transfer output. In that case, an auxiliary output is used as the control
       output. (This is not possible for models without an auxiliary output.) The control output will be a relay output. The
       number of auxiliary outputs that can be used will decrease by one.

Accessories (Order Separately)

USB-Serial Conversion Cable

Model
E58-CIFQ1

Waterproof Packing

Model
Y92S-32

Current Transformers (CTs)

Hole diameter Model
5.8 dia. E54-CT1
12.0 dia. E54-CT3

CX-Thermo Support Software

Model
EST2-2C-MV4

Note: The E5GN is supported by CX-Thermo version 4.2 and higher.

更新日期 2012年10月17日

產品類別

產品資訊

解決方案

支援服務

關於我們

聯絡我們

網路商店

線上客服

産品技術客服中心
008-0186-3102

Site Information

© Copyright OMRON Corporation 1996 - 2023. All Rights Reserved.